"***ERROR***"="***ERROR***";
"Angle = 180.0 degrees"="Ƕ = 180.0 ";
"DOC Roof Help File NOT found."="DOC Roof Help File NOT found.";
"Eaves Fascia Size (mm):  "="ܺ (mm):  ";
"Eaves Fascia Size(mm):  "="ܺ (mm):  ";
"Eaves Soffit Size (mm):  "="ܳ (mm):  ";
"Eaves Soffit Size(mm):  "="ܳ (mm):  ";
"Fascia+Soffit Type:  "=":  ";
"First Gable Size(mm): "="һɽǽߴ(mm): ";
"First Gable Type: "="һɽǽ: ";
"Gable Roof Settings"="˫ݶ";
"Gable-Ended Roof [pick 3 Points]"="˫ݶ [pick 3 Points]";
"Get Slope [from selected Face]"="ȡ¶ [ͨѡ]";
"Get Slope:"="Get Slope:";
"Height of Lower Roof (mm):  "="һ¸߶(mm):  ";
"Help..."="...";
"Hipped Roof Settings"="ݶ";
"Hipped Roof [from selected Face]"="ݶ [ͨѡ]";
"Hipped Roof: Finding Edges <+>%. Please Wait..."="ݶ: ұ <+>%. Ժ...";
"Hipped Roof: Finding Faces <+>%. Please Wait..."="ݶ:  <+>%. Ժ...";
"Hipped Roof: Finished."="ݶ: Finished.";
"Hipped Roof: Finishing."="ݶ: Finishing.";
"Lower Slope (Degrees OR A:B):  "="һ¶(Ƕ  A:B):  ";
"Mansard - Sprocket Roof [from elected Face]"="ݶ [ͨѡ]";
"Mansard Sprocket Roof [from elected Face]"="ݶ [ͨѡ]";
"Mansard | Sprocket Roof [from elected Face]"="ݶ[from elected Face]";
"Mansard/Sprocket Roof Settings"="ݶ";
"Mansard/Sprocket Roof: Finding Edges <+>%. Please Wait..."="ݶ: Finding Edges 100%. Please Wait...";
"Mansard/Sprocket Roof: Finished."="ݶ: Finished.";
"Mansard/Sprocket Roof: Finishing."="ݶ: Finishing.";
"Pyramid Roof Settings"="ܼݶ";
"Pyramid Roof [pick 3 Points]"="ܼݶ [ͨ]";
"Roof Fascia:  "=":  ";
"Roof Gable:"="˫ݶ:";
"Roof Gable:  Pick a Point on the Line of the Second-Gable..."="˫ݶ:  Pick a Point on the Line of the Second-Gable...";
"Roof Gable:  Pick the 1st Corner of the First-Gable [this will also set Z-level]..."="˫ݶ:  Pick the 1st Corner of the First-Gable [this will also set Z-level]...";
"Roof Gable:  Pick the 2nd Corner of the First-Gable..."="˫ݶ:  Pick the 2nd Corner of the First-Gable...";
"Roof Layer and Materials"="ͼͲ";
"Roof Layer:  "="ͼ:  ";
"Roof Pyramid:"="ܼݶ:";
"Roof Pyramid:  Pick a Point on the Line of the Other Side..."="ܼݶ:  Pick a Point on the Line of the Other Side...";
"Roof Pyramid:  Pick the 1st Corner of the Pitch-Side [this will also set Z-level]..."="ܼݶ:  Pick the 1st Corner of the Pitch-Side [this will also set Z-level]...";
"Roof Pyramid:  Pick the 2nd Corner of the Pitch-Side..."="ܼݶ:  Pick the 2nd Corner of the Pitch-Side...";
"Roof Slope (Degrees OR A:B):  "="ݶ¶(Ƕ  N:M):  ";
"Roof Slope (in Degrees or A:B or ^Height(mm)):  "="ݶ¶(Ƕ  N:M)  ߶(mm):  ";
"Roof Soffit: "="²: ";
"Roof Surface:  "=":  ";
"Roof..."="ݶ...";
"Second Gable Size(mm): "="ڶɽǽߴ(mm): ";
"Second Gable Type: "="ڶɽǽ:";
"Set Layer + Materials ? :"="ͼͲ?:";
"Set Layer and Materials ? :"="ͼͲ?:";
"Slope = 1:0"="¶ = 1:0";
"Upper Slope (Degrees OR A:B):  "="ڶ¶ (Ƕ A:B):  ";
"You must select ONE FACE !"="You must select ONE FACE !";
