######### Common module (CMN) #########
CMN_ProxyProgFoul=Proxy program suppression check violation -- current connection will be cut off.
CMN_IeProxySetFoul=IE proxy setting suppression check violation -- current connection will be cut off.
CMN_MultiNicFoul=Multi-NICs suppression check violation -- current connection will be cut off.
CMN_IpModeSetFoul=IP allocation method check violation -- current connection will be cut off.
CMN_MacChangeFoul=MAC address modification suppression check violation -- current connection will be cut off.
CMN_OfflineByForce=Offline by force.
CMN_OffDevDisabled=Network interface card is disabled.

######### Common UI module (CUI) #########
CUI_OKBtn=OK
CUI_CancelBtn=Cancel
CUI_Prompt=Prompt
CUI_Warning=Warning
CUI_BackBtn=<Back(&B)
CUI_NextBtn=Next(&N)>
CUI_FinishBtn=Finish(&F)
CUI_NewConnWizard=Create New Connection Wizard

CUI_Property=Property Setting
CUI_InputUserName=Please input user name.
CUI_InvalidUserName=User name can not contain continuous spaces and can only contain the following characters: \n [A,Z]U[a,z]U[0,9]U{-_.@ }.
CUI_InputPasswd=Please input the password.
CUI_InputPin=Please input the PIN key.
CUI_GetNamePwd_Failed=Failed to read username and password.
CUI_PinError=PIN key is wrong. You could try %d time(s).
CUI_PINLocked=PIN is locked.
CUI_USBKey_InitFailed=Smart Card initializing failed.
CUI_GetUSBKeyFileFailed=Cannot get user information from smart card.
CUI_USBKeyDefaultError=Unknown error.
CUI_BoxTitle_Netconn=Network Connection.
CUI_ConNameTooLong=The length of connection name cannot exceed 25 bytes.
CUI_ConNameInvalid=A connection name cannot contain any of the following characters: \n \\ / : * ? \" ' < > | 
CUI_DomainAuthAccount=Logon-once connection
CUI_BeginPrgUpd=Begin program update
CUI_PrgUpdHintHead=Client program will perform automatic update. The version after update is 
CUI_PrgUpdHintTail=, User authentication will start again after update. Please confirm it.
CUI_PrgUpdRmndHead=Hint: Update the client program to a new version.
CUI_PrgUpdRmndTail=, Method: Click [Operation/Online Upgrade]
CUI_RebootHintForce=To complete the update, please click OK to restart your computer.
CUI_RebootHintOption=You need to restart the computer to complete patch updating. Are you sure to restart right now?
CUI_DefAnnAccName=Quick authentication connection
CUI_UnkErr=Unknown error
CUI_NoMem=Insufficient memory
CUI_ParErr=Parameter error
CUI_VersErr=Connected version error
CUI_NoActive=No active connection
CUI_NoSendBuf=No buffer for sending packets.
CUI_SendPacExcLim=The length of the sent packet exceeds the limit.
CUI_SendErr=Packet sending error
CUI_ConnNameRep=Connection name repeated. Connection is not created.
CUI_MultiActive=Only one connection can be active. Please disconnect the currently active one.
CUI_NoPt=Protocol not exist
CUI_NoDevice=No available device, please make sure your network adapter is not disabled, or you must select an avalidable device again, Method: Click [File/Property].
CUI_BadDevice=Connection disconnected ---- the network interface card is disabled.
CUI_BadCable=Connection disconnected ---- the network cable is not plugged-in properly .
CUI_ConnWakeUp=Connection wakes up from sleep.
CUI_FindNoDownLoadPrg=Auxiliary downloading program not found.
CUI_SysErr=System error
CUI_CannotSendUpdCmd=Cannot send update command to update module.
CUI_DelLogHint=Making logs of the Detail level may occupy a lot of CPU resources and increase I/O operations.
CUI_MainUICannotStartHint=iNode Client cannot startup correctly and thus will exit.
CUI_UpdateCusInfoFinished=Custom info update finished, client may need to install virtual NIC, please restart client after install finished.

SMT_KeyNoReady=Please make sure a smart card has connected to your computer.
SMT_PinCantEmpty=The old PIN key cannot be empty, and its length must between 6 to 15 characters.
SMT_PinInvalHint=The old PIN key can only contain the following characters: \n
SMT_NewPinCantEmpty=The new PIN key cannot be empty, and its length must between 6 to 15 characters.
SMT_NewPinInvalHint=The new PIN key can only contain the following characters: \n
SMT_PinDismatch=The new PIN key you typed do not match. Type the new PIN key in both text boxes.
SMT_ChgPinSucc=PIN changed successfully.
SMT_OperationSucc=Operation Successfully
SMT_OperationFailed=Operation Failed
SMT_PinChgFailAndRetry=Failed to change PIN.
SMT_CheckSmartcardBindFail=Bind smart check failed.

SMT_LogTitle=Connection
CUS_LogPwdChk=Save password(&D)

SMT_OtherOptComBox=Window Option

######### Main UI module (MUI) #########
MUI_ComfirmExitClient=Confirm Client Exit
MUI_ComfirmRemedyClient=Confirm Client Remediation
MUI_RemedyClientHint=Client remediation is needed only when the client does not work properly. \nAre you sure to start client remediation now?
MUI_RemedyClientFailed=Client remediation failed.

MUI_InstanceExist=An instance of iNode or some congeneric program is running.
MUI_PortalAuth=Portal authentication
MUI_VpnAuth=VPN authentication
MUI_1XAuth=802.1X authentication
MUI_SmartcardAuth=Smartcard authentication
MUI_DvpnAuth=DVPN authentication
MUI_CommonConn=Common connection
MUI_AnonymousConn=Quick authentication connection
MUI_DomainConn=Logon-once connection
MUI_StoppingConns=Stopping current session(s). Please wait...
MUI_ConnsStopped=Session stopping finished.
MUI_FoundProgUpd=New update pack is found and will be upgraded automatically. Please wait...

MUI_Cut=Disconnected
MUI_ConnectFailed=Connection failed.
MUI_BeingConnected=Establishing a connection...
MUI_ConnectSucc=The connection is successfully established.
MUI_BeingUp=Logging in
MUI_BeSureToExit=Are you sure to exit iNode Intelligent Client?
MUI_CreateDomainConnNow=Do you want to create a logon-once connection now?
MUI_SrvExitAndRestart=Detected iNode authentication program is down. Please wait a moment while iNode Intelligent Client is trying to start it again...
MUI_SrvStart=iNode authentication program is up now.
MUI_ConnCutNRetrive=Current session closed. Now try to automatically restore it...
MUI_SrvNotRunNRestartFailed=iNode authentication program is not running and cannot be started.iNode Intelligent Client will quit now. \nHint: Please make sure the service 'H3C iNode service' is not disabled.
MUI_SrvExitNClientWillExit=Detected iNode authentication program is down. \niNode Intelligent Client will quit now.
MUI_Err=Error
MUI_ErrInofWithFmt=Error information: %u
MUI_ConnFailWithEnter=Failed to set up a connection.\n
MUI_DelConnWithEnter=Failed to delete the connection.\n
MUI_BeingDown=Logging out
MUI_ConnHasCut=Connection is disconnected.
MUI_Timing=Duration 
MUI_SelLogPath=Please select the save path for log file.
MUI_PwdCannotEmptyNReinput=The old password cannot be empty, please input a password.
MUI_PwdDismatchNReinput=The new password and the confirm password do not match, please try again.
MUI_NewPwdCannotEmptyNReinput=The new password cannot be empty, please input a password.
MUI_ReadConnSumLimit=Reach the upper limit of connection sum (5) -- cannot create a new one.
MUI_BeSureToDelConn=Are you sure to delete the connection?
MUI_AdminAskChgPwd=Administrator requires you change your password
MUI_BesureCancel=Current connection will be cut off if you abort this operation. \nAre you sure to continue?
MUI_BesureInfoOk=Current connection will be cut off if you fail to change password. \nAre you sure your information is correct?

MUI_1xConnBeingGoon=802.1X connection is logging in
MUI_PtConnBeingGoon=Portal connection is logging in
MUI_VpnConnBeingGoon=VPN connection is logging in
MUI_DvpnConnBeingGoon=DVPN connection is logging in
MUI_1xPassNotSec=Pass 802.1X authentication,\nbut not pass security check.
MUI_1xPassButNotSec=802.1X authentication passed. Security check failed.
MUI_PtPassNotSec=Pass Portal authentication\nbut not pass security check.
MUI_PtPassButNotSec=Portal authentication passed. Security check failed.
MUI_VpnPassNotSec=VPN authentication passed\nbut security check failed.
MUI_VpnPassButNotSec=VPN authentication passed. Security check failed.
MUI_DvpnPassNotSec=Dvpn authentication passed,\nbut security check failed.
MUI_VpnPassButNotSec=Dvpn authentication passed. Security check failed.
MUI_1xPass=Passed 802.1X authentication
MUI_PtPass=Passed Portal authentication
MUI_VpnPass=Passed VPN authentication
MUI_DvpnPass=Passed Dvpn authentication
MUI_1xPassAndSec=Passed 802.1X authentication\nand security check
MUI_1xPassSec=Passed 802.1X authentication and security check
MUI_PtPassAndSec=Passed Portal authentication\nand security check
MUI_PtPassSec=Passed Portal authentication and security check
MUI_VpnPassAndSec=Passed VPN authentication\nand security check
MUI_VpnPassSec=Passed VPN authentication and security check
MUI_DvpnPassAndSec=Passed Dvpn authentication\nand security check
MUI_1xConnBeingGoDown=802.1X connection is logging out
MUI_PtConnBeingGoDown=Portal connection is logging out
MUI_VpnConnBeingGoDown=VPN connection is logging out
MUI_1xConnDisconnect=802.1X connection is disconnected
MUI_PtConnDisconnect=Portal connection is disconnected
MUI_VpnConnDisconnect=VPN connection is disconnected
MUI_1xPtNetworkNicCut=Network connection disconnected

MUI_ConnName=Connection Name
MUI_ConnectTime=Connected Time
MUI_DisconnectTime=Last Disconnection
MUI_UserName=User Name
MUI_ProtocolName=Protocol

MUI_Task=Task 
MUI_TaskExecuting=is executing...\n
MUI_BeSureStopTask=are you sure to stop it?
MUI_BeSureExitWithOneCon=There is an online connection. \nExit will disconnect this connection.Are you sure to exit?
MUI_BeSureExitWithCons=Currently there are more than one connections. \nExit will disconnect all the connections.Are you sure to exit?

MUI_Welcom=Welcome to iNode Intelligent Client.
MUI_BeingCancelWaitPls=Cancelling, please wait...

MUI_InitFailed=Initialization failed
MUI_SysErr=System error
MUI_UpdateHint=Client update program\ncannot run alone.
MUI_RunErr=Running error
MUI_DownloadSuc=Downloading succeeded.
MUI_ReauthAftUpdate=Reauthentication is required after update.
MUI_Downloading=Downloading the latest update file ...
MUI_DownloadStatus=Download Status

MUI_SysAdminInfoU=User information: 
MUI_CommConRdTitle=Common connection(&C)
MUI_CommConDes=You need a username and a password to create a new connection.
MUI_AnonyConRdTitle=Quick authentication connection(&Q)
MUI_AnonyConDes=Use the special username and password to create a connection.
MUI_DomainConRdTitle=Logon-once connection(&O)
MUI_DomainConDes=Before logon Windows, first do a network access authentication using the same user information for logon Winodows.
MUI_ShortcutChkTitle=Add a shortcut to this connection to my desktop(&S)

MUI_AuthProto=Authentication Protocol:
MUI_ConCreateTimeLb=Created on: 
MUI_AuthPassTimeLb=Passed on: 
MUI_SecLb=Passed Security Check
MUI_NotSecLb=Security Check Failed
MUI_AuthPassLb=Pass Authentication
MUI_SavePwdRdTitle=Save password(&D)
MUI_AdvancedAuthTitle=Enable advanced authentication(&E)
MUI_SmartCardRdTitle=Smart Card authentication(&K)
MUI_CertRdTitle=Certificate authentication(&Q)

MUI_DelConCfm=Confirm Connection Delete
MUI_CreateShortcutCfm=Are you sure to create a shortcut to the connection on desktop?
MUI_CreateShortcutTitle=Confirm Shortcut Create

MUI_ClientCfgOptions=Client Settings

MUI_FontName=Arial
MUI_SelAuthPt=Select a authentication protocol
MUI_ClientSummary=iNode intelligent client provides a uniform platform for multiple protocols
MUI_SelConType=Select connection type
MUI_ConTypeSupp=The connection type(s) supported by the current protocol.
MUI_ClientVersion=Client Version

MUI_AnonyConExistsHint=A quick authentication connection already exists. \nPlease select one of other connection types.
MUI_DomainConExistsHint=Only one logon-once connection can exist. Cannot create second one. \nPlease select one of other connection types.
MUI_SmartCardUserChgPin=Smart Card User PIN Change
MUI_CollectHostInfo=Collect Host Info
MUI_NoCfgFile=Cannot start up the client for the custom info file cannot be found or has been destroyed. 
MUI_NoArpDrvb=The filter driver is not available on your computer,the active connection will be cut off.Please click [Operation/Install the filter driver] to install it,or else the client cannot work normally.
MUI_ArpFltDrvAvail=It doesn't need to install the filter driver.
MUI_FltHint=The active connection will be cut off.Sometimes you must confirm client \nremediation after the driver is installed.Please click OK.
MUI_UseWinInfo=The online wireless connection will be disconnected if you select Windows to manage wireless. \nAre you sure to continue?

MUI_MuneFile=File(&F)
MUI_MuneFile.Connect=Connect(&A)
MUI_MuneFile.Status=Status(&U)...
MUI_MuneFile.Disconnect=Disconnect(&B)
MUI_MuneFile.NewConn=New Connection
MUI_MuneFile.ChgUserName=Change Username(&C)...
MUI_MuneFile.CreShortcut=Create Shortcut(&S)
MUI_MuneFile.DelConn=Delete(&D)
MUI_MuneFile.Rename=Rename(&M)
MUI_MuneFile.Property=Property(&R)...
MUI_MuneFile.OpenMainWnd=Open Management Window(&O)
MUI_MuneFile.Exit=Exit(&X)

MUI_MuneOperation=Operation(&P)
MUI_MuneOperation.SetTrap=Trigger Security Check(&A)
MUI_MuneOperation.SetTrapT=Trigger Security Check(&A)
MUI_MuneOperation.StopTask=Stop Task(&T)
MUI_MuneOperation.ChgPwdOnline=Change Password Online(&W)...
MUI_MuneOperation.ClientSet=Client Settings(&S)...
MUI_MuneOperation.ChgPin=Smart Card User PIN Change(&C)
MUI_MuneOperation.CollectHostInfo=Collect Host Info(&H)
MUI_MuneOp.RemedyClient=Client Remediation(&R)
MUI_MuneOperation.Upgrade=Online Upgrade(&U)
MUI_MuneOperation.SelCifMsgBox=Please select the place where to save the host identifier file.
MUI_MuneOperation.CifExistMsgBox=Host identifier file already exists. Do you want to re-create?
MUI_GetHostIdFailed=Collecting host information failed.
MUI_GetHostIdSucc=Collecting host information succeeded.
MUI_MuneOperation.InstallArpFltDrv=Install the filter driver(&I)
MUI_MuneOperation.UseWindws=Use Windows to manage wireless(&M)

MUI_MuneInfo=Information(&I)
MUI_MuneInfo.ChkSecInfo=Latest Security Check Result(&L)...
MUI_MuneInfo.HostAndNetworkInfo=Host and Network Information(&M)
MUI_MuneInfo.DamAgentStatus=Dam Agent Status(&C)
MUI_MuneInfo.DamAgentSoftDstrMnt=Dam Agent Software Distribute Management(&D)
MUI_MuneView=View(&V)
MUI_MuneView.ToolBar=Toolbar(&T)
MUI_MuneView.StatusBar=Status Bar(&S)
MUI_MuneView.Icon=Icon(&I)
MUI_MuneView.List=List(&L)
MUI_MuneView.Navigate=Navigation Pane(&B)
MUI_MuneView.AuthInfo=AuthN Info(&A)
MUI_MuneView.Messages=Messages(&M)
MUI_MuneHelp=Help(&H)
MUI_MuneHelp.Topics=Help Topic(&T)...
MUI_MuneHelp.About=About iNode Intelligent Client(&A)...
MUI_RichEditMenu.Copy=Copy
MUI_RichEditMenu.SelAll=Select All
MUI_RichEditMenu.ClearAll=Clear All
MUI_MessageMenu.History=History Message

MUI_ToolTipDel=Delete connection
MUI_ToolTipConnect=Start authentication
MUI_ToolTipDisconnect=Disconnect
MUI_ToolTipStatus=View connection status
MUI_ToolTipProperty=Configure the connection property
MUI_ToolTipSecTrap=Trigger security check
MUI_ToolTipSecInfo=Latest security check result
MUI_ToolTipSysRepair=Client Remediation
MUI_ToolTipHelp=Help

MUI_UserPwdChgDlgTitle=Change Password
MUI_OldPwdStatic=Old Password(&O):
MUI_NewPwdStatic=New Password(&N):
MUI_CfmPwdStatic=Confirm Password(&C):
MUI_SavePwdChk=Refresh the locally saved password after it is changed successfully(&S)

MUI_OldPinStatic=Old PIN(&O):
MUI_NewPinStatic=New PIN(&N):
MUI_CfmPinStatic=Confirm PIN(&C):

MUI_NoAddInfo=Nothing.
MUI_AboutDlgTitle=About
MUI_ProductInfoCombox=Product Info
MUI_VersionStatic=Version:
MUI_DetailVersionStatic=Detailed Version:
MUI_CopyRightCombox=Copyright Info
MUI_CompanyNameStatic=(c) 2004-2008 Hangzhou H3C Technologies Co., Ltd.
MUI_RightReservedStatic=All rights reserved.
MUI_AddInfoCombox=Additional Info

MUI_CfgRunModePgTitle=Run Mode
MUI_CfgLogLevelPgTitle=Log Level
MUI_CfgRunModeComBox=Start Mode
MUI_EnableDomainChk=Enable logon-once function(&O)
MUI_DomainDes=To use logon-once function, you must create a logon-once connection first.
MUI_CfgOSLogoutComBox=OS Logoff
MUI_KeepOnlineChk=Keep session when the OS logoff(&K)
MUI_WndMiniComBox=Window Minimization
MUI_WndMiniChk=Minimize the window after startup(&M)
MUI_CfgLogLevComBox=Log Level
MUI_RecordMsgLogChk=Record massage logs(&M)
MUI_RecordSynChk=Record synchronization mechanism(&S)

MUI_WizardFaceWelcome=Welcome to new connection wizard
MUI_WizardHelpCreConn=This wizard will help you to create a connection related to the authentication protocol.
MUI_WizardProvideConnect=The new connection will connect your computer to the network.
MUI_WizardWireConnRadio=Wire Network
MUI_WizardWirelessConnRadio=Wireless Network
MUI_WizardWireConnDesc=Enter wire connection wizard
MUI_WizardWirelessConnDesc=Enter wireless connection wizard
MUI_WizardToContinue=To continue, click <Next>.
MUI_WizardFinishSum=Completing the new connection wizard
MUI_WizardCreateSucc=You have successfully completed the steps needed to create the following connection.
MUI_WizardToClose=To create the connection and close the wizard, click <Create>.

MUI_ListHeaderX1Name=802.1X 
MUI_ListHeaderPtName=Portal 
MUI_ListHeaderVpnName=L2TP IPSEC VPN 

MUI_NICPg_Hostname=Hostname:
MUI_NICPg_NoAdapterAvailable=No available network adapters
MUI_NICPg_ProVal=Value
MUI_NICPg_Adapter=Network Adapter
MUI_NICPg_NetworkType=Network Type:
MUI_NICPg_MACAddress=MAC Address
MUI_NICPg_IPAddress=IP Address 
MUI_NICPg_SubnetMask=Subnet Mask
MUI_NICPg_DefaultGateway=Default Gateway
MUI_NICPg_GetIPMethod=Method of Getting IP
MUI_NICPg_Dynamic=Automatically
MUI_NICPg_Statical=Statically
MUI_NICStatic=Network Adapter

MUI_MonitorSht_Name=Host and Network Information
MUI_RoutingPg_PgName=Routing Table
MUI_RoutingPg_RoutTbNoEntry=No entries in route table.
MUI_RoutingPg_GetRoutInfoFail=Failed to get the information of IP routing table.
MUI_RoutingPg_NetDes=Network Destination
MUI_RoutingPg_NetMask=Net Mask
MUI_RoutingPg_GatewayAddress=Gateway Address
MUI_RoutingPg_Interface=Interface
MUI_RoutingPg_Metric=Metric

MUI_ClientPg_PgName=Client Information
MUI_ClientPg_CombStaticComponents=Functions and Protocols
MUI_ClientPg_ColumnComponents=Functions and Components
MUI_ClientPg_ColumnSupported=Supported
MUI_ClientPg_ColumnEAD=EAD
MUI_ClientPg_ColumnSmartCard=Smart Card
MUI_ClientPg_ColumnDAMA=Desktop Asset Management
MUI_ClientPg_Column8021=802.1X
MUI_ClientPg_ColumnPortal=Portal
MUI_ClientPg_ColumnVPN=L2TP IPSEC VPN
MUI_ClientPg_ColumnWireless=Wireless

MUI_UserPg_PgName=User
MUI_UserPg_Other=Other
MUI_UserPg_CurrUser=Current User

MUI_UserPg_UsernameStatic=Username:
MUI_UserPg_DomainStatic=Domain:
MUI_UserPg_GroupStatic=Group:
MUI_VistaUserHint=You might need to be logged on as an administrator or a member of \nthe Administrator group in order to run iNode client on Vista. 
MUI_SaveAsWndTitle=Save

MUI_SYSTEMMENU_MIN=Minimize
MUI_SYSTEMMENU_MAX=Maximize
MUI_SYSTEMMENU_CLOSE=Close
MUI_SYSTEMMENU_RESTORE=Restore

MUI_Get_Telnet_DlgTitle=Remote Desktop Access Request
MUI_Get_Telnet_Info=Your administrator is trying to take over your current desktop remotely in order to fix some problems. Please input the username and password through which you have logged into the current OS session.
MUI_Get_Telnet_Hint=If you have logged into a domain, please put the domain name ahead of the username, in between with a backslash (e.g. 'domain\username'). 
MUI_Get_Telnet_UserName=User Name(&U):
MUI_Get_Telnet_Password=Password(&P):
MUI_Get_Telnet_UNEmpty=The user name cannot be empty, please input a user name.

MUI_ManulAuthAftRunning=Start authentication manually after the client is enabled
MUI_AutoAuthAftRunning=Start authentication automatically after the client is running
MUI_AuthBfLogOnDomain=Start authentication before logging into Windows

MUI_BtnCreate=Create(&F)
MUI_ToolBarCreate=New
MUI_ToolBarDel=Delete
MUI_ToolBarConn=Connect
MUI_ToolBarDisConn=Disconnect
MUI_ToolBarStatus=Status
MUI_ToolBarPro=Property
MUI_ToolBarSec=Security
MUI_ClientName=iNode Intelligent Client
MUI_DesktopLnkName=iNode Intelligent Client
MUI_AuthInfo=Authentication Information
MUI_Messages=Messages
MUI_SysInform=User information:  
MUI_CreConnHint=Currently no connection is available.\nDo you want to start wizard to create a connection now?
MUI_CfgStartWizard=Confirm Starting New Connection Wizard
MUI_ShortCutConn=Shortcut to connection
MUI_CfgCreDomConn=Confirm Logon-once Connection Create
MUI_NewConn=&New connection
MUI_NewConn_Des=Create one new connection
MUI_CreateConnWire=Setup Wire Network Connection
MUI_CreateConnWireMenu=Setup Wire Network Connection(&E)
MUI_StartUse=Connect
MUI_StopUse=Disconnect
MUI_CfgProperty=Configure property
MUI_ConnStatus=Connection status
MUI_ChgUserNameAndPwd=Change username and password
MUI_DeleteConn=Delete connection
MUI_RenameConn=Rename connection
MUI_RestartAuth=Restart authentication
MUI_ResartSec=Trigger Security Check
MUI_SecChecRes=Security check result
MUI_StopSecTask=Stop security task
MUI_Self-SevPlatf=Self-service platform
MUI_ChgPwdOnline=Change password online
MUI_CreShortCutConn=Create shortcu
MUI_TaskPane=Task Pane
MUI_ConnOPeration=Wire Connection Operations
MUI_OtherOperation=Settings
MUI_SetClientRunMode=Client Settings
MUI_OpenHelp=Help topic
MUI_ConnInfo=Connection Information
MUI_UpGradeOnline=Online Update

######### Update UI module (UUI) #########
UUI_DownloadFail=Fail to download update file. Please check if network connection is OK.

######### 8021.x UI module (XUI) #########
XUI_TimeFmt=%02u hour(s) %02u minute(s)
XUI_ConnName_Existed=Connection name already exists. Please specify another one.
XUI_UserNamePwdCannotEmpty=Connection name and user name cannot be empty.\nPassword cannot be empty when saving it.
XUI_RootCertErr=Certificate setting errors.
XUI_RootCertCannotEmpty=Root certificate name cannot be empty. Please click <Settings...> to perform related settings.
XUI_UserCertCannotEmpty=User certificate name cannot be empty. Please click <Settings...> to perform related settings.
XUI_UserPrivateKeyCannotEmpty=User private key name cannot be empty. Please click <Settings...> to perform related settings.
XUI_CertCfg=Settings
XUI_RootCertCannotEmptyTitle=Root certificate name cannot be empty.
XUI_UserCertCannotEmptyTitle=User certificate name cannot be empty. 
XUI_UserPrivateKeyCannotEmptyTitle=User private key name cannot be empty.

XUI_InputPwdPls=Please input the password.
XUI_InputConNamePls=Please input connection name.
XUI_CannotRename=Cannot rename this connection for a connection with the name you specified already \nexists.Please Specify a different connection name.
XUI_CannotRenameForLen=Cannot rename this connection: the length of the name you specified \nexceeds the upper limit. Please specify a different one.
XUI_RenameErr=Renaming Connection Error

XUI_MustInputPwd=Password cannot be empty when connecting.
XUI_OperationErr=Operation error
XUI_ConnDataErr=Connection data error
XUI_CfgDataErr=Configuration data error
XUI_WaitSleep=Sleep and wait
XUI_BeginToAuth=Begin authentication
XUI_NoSelAdapter=Network adapter not selected
#XUI_DomainInitUser Domain user

XUI_ChkDevice=Check device
XUI_AquireServer=Check server
XUI_NormalConnect=Normal connection
XUI_NotConnect=Connection not established
XUI_X1NetInfoPgTitle=Network Information
XUI_X1RunInfoPgTitle=Running Information
XUI_X1SecInfoPgTitle=Security Information
XUI_X1StateShtTitle= Status
XUI_SrvWizard=Service Creation Wizard
XUI_AnonyConCannotChgPwd=User name and password of quick authentication conection cannot be modified.
XUI_DefaultConName=My 802.1X Connection

XUI_DeviceCutHint=Your network adapter is disabled or the connection is closed, and you might have no privileges of accessing network.
XUI_DeviceResumeHint=Network connection is resumed
XUI_EAPstartNOresponse=There is no response from peer server. Please make sure your network adapters connected to a proper network.
XUI_UserNamePwdErr=User name or password error
XUI_TimeOut=Idle time limit
XUI_UserTimeExceed=exceeds user time limit
XUI_UserFlowExceed=exceeds user traffic limit
XUI_ReAuthFail=Reauthentication failed
XUI_ForceToOffline=Forced logoff
XUI_UserReqOffline=User logs off actively
XUI_ForbidOfferProxy=Proxy check: Sever forbids the user to provide proxy service.
XUI_AdapterCut=Network error. Your network adapter is disabled or the connection is closed.
XUI_DHCPErr=DHCP error.
XUI_IPConflict=There is an IP address conflict with another system on the network. Connection has been cut off.
XUI_RecOfflineReqFrmServer=Receives offline request from server.
XUI_Close=Close
XUI_BeginHandinPwd=Uploading password...
XUI_BeginValidatePwd=Authenticating password...
XUI_BeginAuth=Beginning authentication...
XUI_BeginCertAuth=Authenticating certificate...
XUI_BeginCerInitFail=Load certificates Failed
XUI_IdeAuthSucc=You have passed the identity authentication
XUI_ConnectCut=Connection failed, please make sure user credential info is correct.
XUI_ConnectCutByDev=Connection cut by the device forcibly.
XUI_ServerReqUserAuth=Sever requires the user to be authenticated
XUI_SleepForTimeOut=Link times out and enters the sleep state
XUI_ConnCutForNetCardNotCls=Connection disconnected. Your network adapter is disabled or the connection is closed.
XUI_RefreshIP=Obtaining IP address...
XUI_RefreshIpWhenDown=Obtain IP address when disconnecting...
XUI_RefreshIPCurrent=Current IP address is 
XUI_RefreshIPDone=Obtaining IP address finished.
XUI_RefreshIPFail=IP address might not be obtained. Please check the network status information later. 
XUI_ConnIsOff=Connection closed.
XUI_ConnectToNet=Connecting to the network...
XUI_OddTime_HMS_FMT=Remaining Time: %02u hour(s) %02u minute(s) %02u second(s)
XUI_Shutdown1XOfXP=Remind: If current 802.1X authentication conflicts with the one Windows provides, please disable the later.
XUI_AccountInfo=Account Information
XUI_AccountDes=You need the user name and password to access networks, the certificate authentication can enhance the security of the communications.
XUI_AccountAnonyDes=Account information of quick authentication connection cannot be changed.
XUI_AccountDomainDes=If you need to logon a Windows domain and wish to use logon-once function, the format for logon-once connction's user name is logon_name@domian_name.
XUI_SelAdapter=Network Property Settings
XUI_CfgDes=You can change the current default settings of the network properties of the connection when they are changeable.
XUI_TLSgOver=The packets processed by TLS exceed the length limit of [%d]

XUI_X1PtRdTitle=802.1X protocol(&X)
XUI_X1PtDes=802.1X is a commonly used authentication for network accesses. 
XUI_X1AuthFailed=802.1X Authentication Failed
XUI_UserPgTitle=User
XUI_GenaralPgTitle=General
XUI_OtherPgTitle=Others

XUI_ConnNameStatic=Connection name(&C):
XUI_UserNameStatic=Username(&U):
XUI_UserPwdStatic=Password(&P):
XUI_Domain=Domain(&D:):
XUI_SavePwdChk=Save password(&D)
XUI_EanbleAdvAuthChk=Enable advanced authentication(&E)
XUI_MACRdShort=MAC authN(&M)
XUI_SmartCardRdShort=Smart Card authN(&K)
XUI_CertificateRdShort=Certificate authN(&I)
XUI_MACRd=MAC authentication(&M)
XUI_SmartCardRd=Smart Card authentication(&K)
XUI_CertificateRd=Certificate authentication(&I)
XUI_CertSetBtn=Settings(&S)...
XUI_SelAdapterComBox=Select NIC
XUI_AuthModeComBox=Authentication Mode
XUI_AuthOptionComBox=Authentication Options
XUI_UserOptionComBox=User Options
XUI_AutoAuthChk=Auto authN after startup(&C)
XUI_AutoAuthChkWizard=Auto authN after startup(&A)
XUI_UpVersionChk=Carry version info(&V)
XUI_PktTypeComBox=Packet Type
XUI_UnicastRd=Unicast(&X)
XUI_MulticastRd=Multicast(&W)
XUI_UpIpChk=Upload IP address(&L)
XUI_RefreshIpAftCutChk=Auto-renew IP address after disconnected(&Z)
XUI_HodIpAftCutChk=Hold IP address after disconnected(&H)
XUI_ReAuthChk=Reauthenticate (90s)(&R)
XUI_RestoreDefaultChk=Restore Defaults(&T)
XUI_ResumeConn=Connect after net restore(&Q)

XUI_PopLogWndChk=Display logon dialog when enable the connection manually(&P)
XUI_CertCfgHintStatic=You can click <Browse...> to select the desired file.
XUI_RootCertStatic=Trusted root certificate:
XUI_UserCertStatic=User certificate:
XUI_UserPrivateKeyStatic=User private key:
XUI_PrivateKeyStatic=Private key password(&P):
XUI_BrowseBtn=Browse...

XUI_RunInfoCombox=Running Info
XUI_CruDurationStatic=Current duration:
XUI_SumDurationStatic=Total duration:
XUI_DurationHintStatic=Note: Durations above are only for reference, not for accounting purpose.
XUI_StatusStatic=Status:
XUI_StatusConStatic=Connected
XUI_StatusDisBtn=Disconnect(&D)

XUI_NetInfoCombox=Network Info
XUI_AdapterStatic=Network Adapter
XUI_AuthIpStatic=Current IP Address
XUI_GatewayStatic=Gateway Server
XUI_DhcpStatic=DHCP Server
XUI_WinsStatic=Wins Server

XUI_AutoConnExists=A connection that initiates authentication automatically has existed.
XUI_CusTimeStatic=Customized At:

XUI_BroadLogoff=Broadcast logoff(&G)
XUI_CertAdvandCfg=Certificate Authentication Configure
XUI_CertAdvandCfgStaA=Certificate Options
XUI_CertAdvandCfgStaB=Authentication Type
XUI_BtnCertsel=Select certificate(&S)...
XUI_ChkVerifysvr=Validate server certificate chain(&V)
XUI_RdEaptls=EAP-TLS (&T)
XUI_RdPeap=PEAP(&A)
XUI_StaUsername=Protected user name(&U):
XUI_StaPwd=Protected password(&W):

XUI_CertCfgErrTitle=Certificate Property
XUI_CertHashCannotEmpty=Client certificate must had been selected when using EAP-TLS authentication type.
XUI_ProtectNameCannotEmpty=Protected user name cannot be empty when using PEAP authentication type.
XUI_ProtectPWDCannotEmpty=The password can not be empty, please input the password.

XUI_SelCertAuthPls=Please initiate the connection again after the certificate authentication is enabled. Method: Click [File/Property].
XUI_CertAuthTypeErrHead=Sever requires 
XUI_CertAuthTypeErrTail= type to be used. Please initiate the connection again after selecting the required type.

XUI_ForbidIPChange=[ARP FILTER]Client forbids the user to modify the IP address of the adapter which is selected by the onine connction. 
######### Portal UI module (PUI) #########
PUI_TipCaption=Portal Authentication.
PUI_DefaultConName=My Portal Connection
PUI_Wait=Please wait...
PUI_InputConnName=Please input a connection name.
PUI_SameConnName=A same connection already exists. Please rename the connection.
PUI_TimeHour=hours
PUI_TimeMinute=minutes
PUI_WaitCancelCreate=Processing disconnect request, please wait...
PUI_UserNameLessThan32=The length of user name and service suffix cannot exceed 32.
PUI_ConnName_Existed=Connection name already exists. Please specify another one.
PUI_UserName_WrongForm=Please input the username in correct format (abc@cams).
PUI_EmptyPassword=The password can not be empty, please input the password.
PUI_WndTitle_Statue=Status
PUI_PortalAuthFailed=Portal Authentication Failed
PUI_UserName_TooLong=The username exceeds the specified limit, please try again.
PUI_PortalProName=Portal protocol(&P)
PUI_PortalPtDes=Portal is a portal-based authentication for the broadband accesses.

PUI_PgNetworkTitle=Network
PUI_PgNetworkServerIpStatic=Server IP(&S):
PUI_PgNetworkInputIp=Please input server IP.
PUI_PgNetworkInvalidIp=The IP you input is not valid.


PUI_LogTitle=Connection
PUI_LogUsNamStatic=Username(&U):
PUI_LogPwdStatic=Password(&P):
PUI_LogPinStatic=PIN(&I):
PUI_LogPwdChk=Save password(&S)
PUI_LogOKBtn=Connect
PUI_LogPropertyBtn=Properties...(&V)
PUI_LogHighAuth=Enable advanced authentication(&H)
PUI_LogUsbCardAuth=Smart card anthN(&K)
PUI_LogMacAuth=MAC anthN(&M)
PUI_PgNetWkChkAutoCon=Connect after net restore(&R)
PUI_ResumeConnExists=A connection that initiates authentication after net restore has existed. 

PUI_CreatTwoStatic=Portal Connection Basic Attributes
PUI_CreatTwoCommentStatic=You need the username and password to access networks and select the desired service.
PUI_CreatTwoConNameStatic=Connection Name(&L):
PUI_CreatTwoUserNameStatic=Username(&U):
PUI_CreatTwoPwdStatic=Password(&P):
PUI_CreatTwoServiceTypeStatic=Service type(&T):
PUI_CreatTwoPwdChk=Save password(&S)
PUI_CreatTwoVersChk=Carry version info(&V)
PUI_CreatTwoAutoChk=Auto authenticate after startup(&C)
PUI_CreatTwoHighAuth=Enable advanced authentication(&H)
PUI_CreatTwoUSBChk=Smart card authentication(&K)
PUI_CreatTwoMacAuth=MAC authentication(&M)
PUI_CreatTwoResumeCon=Connect after net restore(&R)


PUI_CreatOneStatic=Obtain the portal server information
PUI_CreatOneCommentStatic=The Portal server information will be saved to the connection you have created to be used for authentication.
PUI_CreatOneMentStatic=Connecting to the server, please wait...
PUI_CreatOneConStatic=Asking for connect...

PUI_ProTitle=General
PUI_ProUsNamStatic=Username(&U):
PUI_ProPwdStatic=Password(&P):
PUI_ProServiceTypeStatic=Service type(&T):
PUI_ProPwdeChk=Save password(&S)
PUI_ProVersChk=Carry version info(&V)
PUI_ProAutoChk=Auto authN after startup(&C)
PUI_ProUsbCardAuth=Smart card authentication(&K)
PUI_ProMacAuth=MAC authentication(&M)

PUI_OtherDlgTitle=Others
PUI_OtherOptComBox=Window Option
PUI_OtherWndChk=Display logon dialog when enable the connection manually(&P)

PUI_StatusTitle=Portal Running Information
PUI_StatusRunInfoCombox=Running Info
PUI_StatusStatic=Status:
PUI_StatusConStatic=Connected
PUI_StatusAuthTimeStatic=AuthN Elapsed Time:
PUI_StatusAcesTimeStatic=Access Elapsed Time:
PUI_StatusAuthIPStatic=Current IP address:
PUI_StatusDisBtn=Disconnect(&D)
PUI_HintStatic=Note: Durations above are only for reference, not for accounting purpose.

######### VPN UI module (VUI) #########
VUI_MyVPNConnName=My VPN Connection
VUI_Font=Arial
VUI_InvalidConName=Connection name is empty or contains invalid characters.\nPlease input again.
VUI_InputValidLNSIP=Please input a complete and valid IP address of the LNS server.
VUI_InvalidUserPwd=User password is empty or contains invalid characters.\nPlease input again.
VUI_InvalidPreSharedKey=Identity authenticator is empty or contains invalid characters.\nPlease input again.
VUI_InputValidIPSECServer=Please input a complete and valid IP address of the IPSEC server.
VUI_InputTunnelName=Please input the Tunnel name.
VUI_InputLocalPeerName=Please input the Local security gateway name and Remote security gateway name.
VUI_ConSeniorProperty=Advanced Property
VUI_ConProperty=VPN connection properties
VUI_TimeFormat=%02u hour(s) %02u minute(s)
VUI_CfgNameError=Connection name and user name cannot be empty.\nPassword cannot be empty when saving it.
VUI_EmptyPwd=Password cannot be empty when connecting.
VUI_ConDataError=Connection data error
VUI_InputValidISAKMPSA=ISAKMP-SA lifetime is error, please input a valid value between 60 and 604800.
VUI_LocalGateName=Local security gateway name is empty or contains invalid characters.\nPlease input again.
VUI_PeerGateName=Remote security gateway name is empty or contains invalid characters.\nPlease input again.
VUI_SendKeepAliveTimerErr=Send KeepAlive packets time interval is error, please input a valid value between 20 and 28800.
VUI_RecvKeepAliveTimerErr=Recieve KeepAlive packets timeout time is error, please input a valid value between 20 and 28800.
VUI_InputValidPLS=SA lifetime is error, please input a valid value between 30 and 604800.
VUI_InvalidTunnelName=Tunnel name is empty or contains invalid characters.\nPlease input again.
VUI_InputValid1000PLS=Interval for sending Hello packets is error, please input a valid value between 60 and 1000.
VUI_InvalidTunnelPwd=Tunnel authentication password is empty or contains invalid characters.\nPlease input again.
VUI_InvalidInput=The inputted value contains illegal characters.
VUI_USER_CERT_UNKOWN=User certificate is not set. Please click "Select a certificate..." button to select user certificate.
VUI_CERT_UNDEFINE=No certificate. Please click "Cert-settings" button to select certificate.
VUI_USER_CERT_FAIL=Get user certificate failed
VUI_USBKEY_TIMEOUT=Smart Card operation time out
VUI_USBKEY_ERROR=Smart Card error
VUI_CERT_NO_SET=Do not set certificate.Please click "Properties..." button to set.
VUI_RSASecId=Use RSA Security ID(&Y)

VUI_VpnPtRdTitle=L2TP IPSEC VPN protocol(&V)
VUI_VpnPtDes=Connect to the remote access server through Internet or other networks to access network resources securely.

VUI_IKESecurityProposal=IKE security proposal settings
VUI_IKENegMode=Negotiation mode(&N):
VUI_IKEIDType=ID type(&I):
VUI_IKEAuthMethod=Authentication method(&M):
VUI_IKEEncrypt=Encryption algorithm(&E):
VUI_IKEAuth=Authentication algorithm(&A):
VUI_IKEDHGroup=Diffie-Hellman group identifier(&D):
VUI_IKEISAKMPSA=ISAKMP-SA lifetime(&K):
VUI_IKESecond=second(s)
VUI_IKELocalName=Local security gateway name(&L):
VUI_IKERemoteName=Remote security gateway name(&R):
VUI_IKESendKeepAlive=Send KeepAlive packets regularly(&S)
VUI_IKETimeInterval=Time interval(&T):
VUI_IKETimeout=Timeout time(&O):
VUI_IKERecvKeepAlive=Recieve KeepAlive packets(&F)

VUI_L2TPProSetting=L2TP Protocol Settings
VUI_L2TPTunnelName=Tunnel name(&T):
VUI_L2TPAuthMode=Authentication mode(&A):
VUI_L2TPHelloInterval=Interval for sending Hello packets(&I):
VUI_L2TPUseTunnelPwd=Use tunnel authentication password(&U)
VUI_L2TPTunnelPwd=Tunnel authentication password(&P):
VUI_L2TPAVPHidden=Use AVP Hidden

VUI_BASESetting=VPN Connection Basic Settings
VUI_BASELNSIP=LNS Server IP(&S):
VUI_BASEUserName=Login username(&U):
VUI_BASEUserPwd=Login password(&P):
VUI_BASEIfEnableIpsecCombox=Whether to Enable IPSec
VUI_BASEUseIPSEC=Enable IPSec security protocol(&E)
VUI_BASEPreSharedKey=Authenticator(&K):
VUI_BASEIPSECSERVERIP=IPSec Server IP:
VUI_BASEIPSECSERVERIPCombox=IPSec Server IP
VUI_BASELNSASIPSECServer=Use LNS server IP(&L)
VUI_BASEUseOtherIPSECServer=Use other IPSec server IP(&I)
VUI_BASEHeigth=Advanced(&C)...
VUI_BASEUsbKeyAuth=Smart card authentication
VUI_BASEAdvAuth=Get username and password from smart card(&Q)
VUI_BASEMethod=Authen-method(&M):
VUI_BASEComboMethod1=Pre-shared-Key
VUI_BASEComboMethod2=Certificate
VUI_BASEBtnCertSet=Cert-Settings(&W)...

VUI_IPSECProSetting=IPSec Security Proposal Settings
VUI_IPSECEncapMode=Encapsulation mode(&E):
VUI_IPSECSALifetime=SA lifetime(&S):
VUI_IPSECAdopSecuriProto=Used security protocol(&U):
VUI_IPSECESPAuth=ESP authentication algorithm(&A):
VUI_IPSECESPEncypt=ESP encryption algorithm(&T):
VUI_IPSECAHAuth=AH authentication algorithm(&H):
VUI_IPSECUseNat=Use NAT traversal(&N)
VUI_UsePFS=Use PFS
VUI_PFS=PFS

VUI_CreateWizardTitle=VPN Connection Basic Settings
VUI_BaseSettings=Basic Settings
VUI_CreateWizardComment=You can use the username and password to access networks, and click <Advanced> to configure the advanced attributes of the VPN connection.
VUI_CreateWizardConName=Connection name(&N):
VUI_CreateWizardADVAUTHN_CHECK=Get user name password from Smart Card(&A)
VUI_CreateWizardMethod=Authen-method(&M):
VUI_CreateWizardBtnCertSet=Cert-Settings(&W)...
VUI_DoNotAccessingInternet=Do not allow accessing Internet

VUI_StatusDisconnected=Disconnect(&O)
VUI_StatusConnectedTime=Access Elapsed Time:
VUI_StatusIP=Access IP address:
VUI_Status=Status:
VUI_StatusConnected=Connected
VUI_StatusRuninfo=Running Information

VUI_LOGONUserName=Username(&U):
VUI_LOGONUserPwd=Password(&P):
VUI_LOGONSavePwd=Save Password(&R)
VUI_LOGONUserAdvAuth=Get username and password from smart card(&A)
VUI_LOGONUsbAuth=Smart Card authN(&K)
VUI_LOGONPin=PIN(&N):
VUI_LOGONCerAuth=Certificate authN(&Q)
VUI_LOGONCerSetting=Settings(&S)...
VUI_LOGONConnect=Connect(&C)
VUI_LogWndProperty=Properties...(&Y)
VUI_LOGONBtnCertSet=Cert-Settings(&W)...
VUI_LOGONRECCertCfg=Use certificate(&Q)
VUI_VerifyCode=Verify code(&V):
VUI_CertUserPwd=Get username and password from certificate(&T)

VUI_OtherOption=Window Option
VUI_OtherPopupWnd=Display logon dialog when enable the connection manually(&P)

VUI_BASEPAGETITLE=Basic Settings
VUI_L2TPPAGETITLE=L2TP Settings
VUI_IPSECPAGETITLE=IPSec Settings
VUI_IKEPAGETITLE=IKE Settings
VUI_OTHERPAGETITLE=other

VUI_CERYProperty=Certificate Property
VUI_CERTSaveMatter=Certificate Store
VUI_CERTUseSmartCard=Use my smart card
VUI_CERTUseMyLocalCert=Use a certificate on this computer
VUI_CERTSelectUserCert=Select a certificate...
VUI_CERTSelectRootCert=Select a CA Certificate...
VUI_CERTAuthServerOption=Validate Server Option 
VUI_CERTAuthServerName=Validate server's name:

VUI_USERPIN=User's PIN
VUI_USERPINInput=Please type user's PIN(6-15 characters):
VUI_SCSvrBAD=The smart card service which display name is "Smart Card" is not running. Cannot use certificates saved in it.Please retry after reboot the machine.
VUI_EsafeSvrBAD=The smart card driver service which display name is "eSafe DeviceNotification service" is not running. Cannot use certificates saved in it.
VUI_SmartCardBind=SmartCard Bind

VUI_CERTSelectTitle=Select Certificate
VUI_CERTSelectStatic=Please select a certificate you want to use.
VUI_CERTSelectWarning=Please make sure you have selected a valid certificate.
VUI_CERTSubject=Issued To
VUI_CERTIssuer=Issued By
VUI_CERTPurpose=Intended Purposes
VUI_CERTExpDate=Expiration Date
VUI_CERTUsageAll=<All>
VUI_CERTUsageSvrAuth=Server Authentication
VUI_CERTUsageClientAuth=Client Authentication
VUI_CERTUsageCodeSigning=Code Signing
VUI_CERTUsageEmailProtect=Secure Email
VUI_CERTUsageIPSECEndSys=IPSEC End System
VUI_CERTUsageIPSECTunnel=IPSEC Tunnel
VUI_CERTUsageIPSECUser=IPSEC User
VUI_CERTUsageTimeStamp=Time Stamping
VUI_CERTUsageIKEIntermediate=IKE Intermediate
VUI_CERTUsageKP_EFS=Encrypting File System
VUI_CERTUsageKP_EFS_RECOVERY=Encrypting File System Recovery
VUI_CERTUsageOther=Other Usages
VUI_CERTErrUsercertCSP=You have selected using certificate authentication. Please click <Settings...> to perform related settings.
VUI_TunnelPwdError=tunnel password error

VUI_RouteSetting=Route Settings
VUI_RouteDescription=Add the network address and mask
VUI_Add=Add
VUI_Delete=Delete
VUI_IP=network address
VUI_Mask=Mask
VUI_AddRoute=Add Route
VUI_DeleteRoute=Are you sure to delete the route?
VUI_SelectRoute=Please select a route.
VUI_IpOrMaskBlank=network address and mask cannot be empty.
VUI_MaskError=The specified mask parameter is invalid. (network address & Mask) != network address.
VUI_NetworkAddrRepeat=There is already a same network address.
VUI_AddRoutePrincple=The network address and mask must satisfy (network address && Mask) = network address.

VUI_VPNCfgFileError=This is not a correct configuration file.
VUI_ImportCfgFromFile=Import VPN configuration from file
VUI_ImportCfg=Import VPN Configuration
VUI_SelectCfgFilePath=Select file path

######### Security UI module (SUI) #########
SUI_gszSumHeadPass=Passed successfully.
SUI_gszSumHeadReMind=security check is passed but the security vulnerability exists.
SUI_gszSumHeadIsolate=Does not meet security requirements and your computer is unable to access network resource beyond the quarantine region.
SUI_gszSumHeadIsolatetimeout=Does not meet security requirements and your computer will be unable to access network resource beyond the quarantine region.
SUI_gszSumHeadLogoff=Does not meet security requirements and current connection has been cut off.
SUI_gszSumHeadLogofftimeout=Does not meet security requirements and current connection will be cut off.
SUI_gszIsolateTimeoutHead=Your computer will be isolated to quarantine region in 
SUI_gszIsolateTimeoutTail= seconds.
SUI_gszLogoffTimeoutHead=Current connection will be cut off in 
SUI_gszLogoffTimeoutTail= seconds.
SUI_AVChkAbnomal=Abnormal
SUI_AVChkNomal=Normal
SUI_gszAVInstall=Antivirus software installation
SUI_gszAVRun=Antivirus software running
SUI_gszAVDefVer=Virus definition
SUI_gszAVEngVer=Antivirus scan engine
SUI_gszAVVirus=Virus check
SUI_gszVirusStatus=Uncleared
SUI_gszActionIsPassY=Yes
SUI_gszActionIsPassN=No
SUI_gszActionNotInvolved=Not involved
SUI_gszActionREMIND=Remind
SUI_gszActionISOLATE=Isolate
SUI_gszActionOFFLINE=Offline
SUI_gszStatusMANUAL=Waiting for manual repair
SUI_gszStatusAUTO=Auto-repairing
SUI_gszStatusSUCCESS=Auto-repair successfully
SUI_gszStatusFAIL=Auto-repair failed
SUI_gszVirusSummaryHint=Each virus' infomation are listed in the below table
SUI_gszAVOK=Current antivirus software on your computer is compliant with security requirements.
SUI_gszPatchOK=Current OS patches are compliant with security requirements.
SUI_gszPatchFAIL1=Current OS is
SUI_gszPatchFAIL2=,missing patches:
SUI_gszBWOK=Software installation and running are compliant with security requirements.
SUI_gszBWServicesOK=Services are compliant with security requirements.
SUI_gszAVTblHeadRow1=Check list
SUI_gszAVTblHeadRow2=Compliant with security requirements
SUI_gszAVTblHeadRow3=Action
SUI_gszAVTblHeadRow4=Status
SUI_gszAVTblHeadRow5=Description
SUI_gszAVUpdateURLtail=The URL for updating virus definition and antivirus scan engine is: 
SUI_gszAVUpdateHint=You are recommended to update the antivirus software using the scan engine and virus definition (if any) equipped with it.
SUI_gszVirusTblHeadRow1=Name;
SUI_gszVirusTblHeadRow2=Type
SUI_gszVirusTblHeadRow3=Detected time
SUI_gszVirusTblHeadRow4=Status
SUI_gszPatchTblHeadRow=Patch Name
SUI_gszPatchTblHeadRow1=Patch Info
SUI_gszPatchTblHeadRow2=Action
SUI_gszPatchTblHeadRow3=Status
SUI_gszPatchUpdateURLtail=Please get requisite patches from the patch update server immediately.The server is 
SUI_gszPatchUpdateHint=Please intall all of the requisite patches quickly to ensure that your computer and network are secure.
SUI_gszPatchAbnormalhead=The causes for checking failure: 
SUI_gszWITblHeadRow=Softwares required to be installed
SUI_gszSoftwareTblHeadRow1=Compliant with security requirements
SUI_gszSoftwareTblHeadRow2=Action
SUI_gszSoftwareTblHeadRow3=Status
SUI_gszBITblHeadRow=Softwares forbidden to be installed
SUI_gszWRTblHeadRow=Softwares required to run
SUI_gszBRTblHeadRow=Softwares forbidden to run
SUI_gszWSTblHeadRow=Services required to run
SUI_gszBSTblHeadRow=Services forbidden to run
SUI_gszNetTblHeadRow=Net Stream

SUI_SecCheckHeadHTML=Security Check Result:
SUI_ConNameHtml=Connection name: 
SUI_ChecktTimeHtml=Check time: 
SUI_AVCheckHtml=Antivirus software check result
SUI_OSPatchCheckHtml=Current OS patches check result
SUI_SotfwareCheckHtml=Software installation and running check result
SUI_ServicesCheckHtml=Services check result
SUI_NetScanCheckHtml=NetStream check result
SUI_WeakPwdCheckHtml=Windows Password check result
SUI_RegCheckHtml=Register check result
SUI_SecCheckTitleHTML=Security Check Result
SUI_LanguageHtml=ISO-8859-1
SUI_NetScanCheckHtmlOK=Current netstreams are compliant with security requirements.
SUI_PwdCheckHtmlOK=Windows Password is compliant with security requirements.
SUI_PwdCheckHtmlAbnormal=Windows Password is compliant with security requirements.
SUI_NetScanCheckHtmlAbnormal=The causes for checking failure:
SUI_NetScanIP=IP Stream
SUI_NetScanNUCast=Broadcast Stream
SUI_NetScanPKT=PKT Stream
SUI_NetScanIPCon=TCP/UDP Connection Number
SUI_RegisterCheckHtmlOK=Register Check is compliant with security requirements.
SUI_gszRegTblHeadRow1=Check list
SUI_gszRegTblHeadRow2=Compliant with security requirements
SUI_gszRegTblHeadRow3=Action
SUI_gszRegTblHeadRow4=Status
SUI_gszRegTblHeadRow5=Description


######### 8021.x auth module (XAU) #########




######### Portal auth module (PAU) #########
PAU_Connection_Already_Existed=Failed to set up a Portal connection due to existence of same connection.
PAU_GetLocalIP_Failed=Failed to set up a Portal connection due to failure of obtaining local IP.
PAU_CreateNicInfoError=Failed to set up a Portal connection due to failure of obtaining local NIC information.
PAU_Cant_Connect_Server=Failed to communicate with Portal server.
PAU_User_AlreadyOnLine=Portal authentication failed. Please try to disconnect the connection and start authentication again.
PAU_NetError_AuthFailed=Portal authentication failed due to network error.
PAU_AuthFailed_ErrCodeUnknown=Portal authentication failed,the error code is unknown.
PAU_AuthFailed_Rejected=Portal authentication failed due to being rejected by server.
PAU_AuthFailed_RenewIP=Portal authentication failed due to network fault. Please update your local IP and start authentication again.
PAU_IllegalServer_AuthFailed=Portal authentication failed due to invalid Portal server.
PAU_Processing_Another_Auth=Portal authentication failed for one user is in authentication process. Please try later.
PAU_AuthFailed_ChallengeFault=Portal authentication failed,the error code is 4,please contact the administrator.
PAU_AuthFailed_UserInfoError=Portal authentication failed due to user information error.
PAU_AuthFailed_NetFault=Portal authentication failed due to network fault,please contact the administrator.
PAU_Server_Ready_Stop=Portal authentication failed for the Portal server is shutting down.
PAU_AuthFailed_ResMallocFailed=Portal authentication failed due to resource allocation failure.
PAU_HeartBeat_TimedOut=Network timed out for the user is off line.
PAU_Force_Connection_Offline=Received a logout request packet. User logged out.
PAU_StartAuthReq=Starting authentication request...
PAU_UserOnline=User is on line.
PAU_StartMallocRes=Starting to allocate resource...
PAU_User_ActiveLogout=User logged out.
PAU_CreateInvalidParam=Connection parameter error. Please re-set up a connection.
PAU_CreateException=Connection parameter error. Please re-set up a connection.
PAU_Auth_RefreshIPError=Failed to obtain the IP address of the selected NIC.
PAU_GetSysInfo_TimedOut=Obtaining system information timed out.
PAU_CreateErrParam=Connection parameter error. Please re-set up a connection.
PAU_CreateErrDomain=Failed to set up a Portal connection due to nonexistence of domain.
PAU_CreateTimedOut=Failed to set up a Portal connection due to network timeout.
PAU_CreateSockError=Failed to set up a Portal connection due to network error, If reconnecting failed, Please restart the client and try again.
PAU_CreateOnline=Failed to set up a Portal connection, please be sure that the network card is installed correctly or you are online.
PAU_CreateGetIP=Failed to set up a Portal connection due to failure of obtaining local IP.
PAU_50200_Reuse=The port(No.50200) has already been used by another process.
PAU_NIC_NotReady=Portal authentication failed, because the NIC is not ready.
PAU_WakeUp_RefreshIp=Begin to update IP.
PAU_WakeUp_RefreshIpFailed=Failed to update IP, Please update your local IP and start authentication again. 
PAU_Auth_GetMacError=Portal authentication failed due to getting MAC address error.    

PAU_NicCut=Connection disconnected, Your network adapter is disabled or the network cable is unplugged.
PAU_NicRestore=Network is connected.

#########  VPN auth module (VAU) #########
VAU_ConfigureError=Connection cannot be created. Please check network configurations
VAU_ConnDisconnected=Connection is disconnected
VAU_StartUseSucc=The connection is successfully established.
VAU_TipStart=Begin authentication
VAU_TipStarting=Establishing a connection...
VAU_StartUseFailed=Connection failed.
VAU_IPSecServiceRunning=Windows IPSEC Services(IPSEC Services or IPsec Policy Agent) is running, please stop it and try again.
VAU_IKEProposalError=IKE setting error
VAU_IPSecProposalError=IPSec setting error
VAU_IpsecAuthenticating=Processing Ike negotiation...
VAU_L2TPAuthenticating=Creating tunnel and session...
VAU_PPPAuthenticating=Getting IP address...
VAU_StartErrorIKE=Ike negotiation failed
VAU_StartErrorL2TP=Tunnel and session creation failed
VAU_StartErrorPPP=Cann't get IP address
VAU_StartErrorIKETimeout=Ike negotiation timeout,please check network config
VAU_StartErrorL2TPTimeout=Tunnel and session creation timeout,please check network config
VAU_StartErrorPPPTimeout=Get IP address timeout,please check network config
VUI_InputValidIKEPort=IKE Port is error
VUI_InvalidL2TPPort=L2TP Port Error
VUI_IKEPort=IKE Port:
VUT_L2TPPORT=L2TP Port



######### Security auth module (SAU) #########
SAU_UpdateActivityPrepair=Preparing patch check resources...
SAU_UpdateActivityPrepairFail=Preparing patch check resources failed.
SAU_UpdateActivityCheck=Patch check ongoing... 
SAU_UpdateActivityCheckFail=Patch check failed.
SAU_UpdateActivityDownload=Patch download ongoing...
SAU_UpdateActivityDownloadFail=Patch download failed.
SAU_UpdateActivityInstall=Patch installation ongoing...
SAU_UpdateActivityInstallFail=Patch installation failed.
SAU_UpdateActivityFinishNoPatch=Patch check completed with no lack of patches.
SAU_UpdateActivityFinishNoRestart=Patch update completed.
SAU_UpdateActivityFinishNeedRestart=You need to restart your computer to make the updates take effect.
SAU_UpdateActivityAborted=Patch check or update aborted.
SAU_NoDescription=No description.
SAU_PamOnGoingPlsWait=Patch check and update is ongoing, please wait...
SAU_PamDoneThenQuit=Patch check and update is done or aborted, now try to stop security check session...
SAU_MsgLackMatchedFoldHead=No folder matching 
SAU_MsgLackMatchedFoldTail= . Please confirm the installation or reinstall related plugins
SAU_MsgPluginUpdateFailHead=Plugin loading update failed (
SAU_MsgPluginUpdateFailTail=). The old plugin will not be replaced.
SAU_MsgLackPluginDllHead=Lack plugin dll file 
SAU_MsgLackPluginDllTail=.This may be caused by uninstalling the old plugin. if the new plugin is installed, click the red cross button to restart the security check.
SAU_MsgUnknownInfo=[Unknown]
SAU_MsgUnknownError=Unknown error
SAU_MsgAvInfoHead=Antivirus software name: 
SAU_MsgAvInfoTail=, Version: 
SAU_MsgAvCallingFailHead=Failed to call antivirus plugin. Error code is: 
SAU_MsgAvCallingFailTail=. No further information from AV-plugin.
SAU_MsgCurOSPatchInfoHead=Current OS: 
SAU_MsgCurOSPatchInfoTail1=, and there is no updated Windows patches
SAU_MsgCurOSPatchInfoMid=Releast date of the latest patch is 
SAU_MsgCurOSPatchInfoTail2=, and the latest update patches include: 
SAU_MsgLackOSPatchInfoHead=The sum of missing patches: 
SAU_MsgLackOSPatchInfoTail=. The information of patches is as follows: 
SAU_MsgPamInitFail=Initializing patch check tool failed and thus the patch will not be checked.
SAU_MsgCommonAbortSecuthTail=. Cannot pass security check.
SAU_MsgSecauthFailGeneral=Security check is not passed and the unqualified check items are: 
SAU_MsgSecauthWarningGeneral=Security vulnerabilities are : 
SAU_MsgVirusDefBelowDemand=Current virus definition version is lower than the lowest version required
SAU_MsgVirusEngBelowDemand=Current virus scan engine version is lower than the lowest version required
SAU_MsgOSLackPatches=Current operating system lacks the required patches
SAU_MsgVirusExist=Some viruses are found in the current operating system
SAU_MsgSoftwareCheckFoul=Software installation or running state violation against security requirements
SAU_MsgSecauthForDetail=Click [Latest Security Check Result] button for detailed information.
SAU_MsgSecauthChecklist=Items to be checked in this security check are: 
SAU_MsgAVRelatedCheck=The check about antivirus
SAU_MsgNeedVirusDef=Virus definition version
SAU_MsgNeedVirusEng=Virus scan engine version
SAU_MsgNeedPatchCheck=System patch update state
SAU_MsgNeedKillVirus=Kill virus and analyze the result
SAU_AbnrmlAVKillPlugin=Antivirus plugin error, cannot initiate virus-scan task
SAU_MsgPamSetServerFail=Setting patch server failed and thus the patch will not be checked.
SAU_MsgPamStartUpdateServiceFail=Starting Automatic Updates Service failed and thus the patch will not be checked.
SAU_MsgPamStartBITSServiceFail=Starting Background Intelligent Transfer Service failed and thus the patch will not be checked.
SAU_MsgPamStartUpdateFail=Starting patch check failed and thus the patch will not be checked.
SAU_MsgPamGetStatusFail=Getting patch update status failed and thus the patch will not be checked.
SAU_MsgPamCurrentStatus=Current progress of patch check and update: 
SAU_MsgAvClientNotAllowed=The anti-virus client currently in use is not required by EAD strategy.
SAU_PamLackDll=The patch dynamic link library is lacked. Please check whether this client version support the patch link function.
SAU_OfflinePortal=Your computer is unable to access network resource beyond the quarantine region now.
SAU_XML_OfflinePortal=Security check can not be executed, so current session closed.
SAU_RepairWhileNotIsolated=Warning: Please finish all the required repairing work quickly because you are allowed to access network normally only for 
SAU_HoursMid= hour(s) 
SAU_MinutesMid= minute(s) 
SAU_SecondsEnd= second(s).
SAU_MsgPlsResume=Please resume security check after security check requirement is meeted.
SAU_MsgPlsResumePortal=Please make sure security check is resumed after the security check requirements are meeted.
SAU_MsgSecRemind=Note: Please update the security vulnerability of the report in time.
SAU_MsgAutoResumeHint=The system will resume security check automatically.
SAU_MsgSecAutoUpdateDone=Auto update task is completed. Security vulnerability is eliminated.
SAU_MsgSecFoundAlarm=Security vulnerability has been found in your computer
SAU_MsgSecFoundAlarmChg=Note: security vulnerability information is changed.
SAU_MsgSecAlarmOff=Note: security vulnerability is eliminated.
SAU_MsgAbortOnlineReq=No response is received from the server, and you will be forced to log off. Please check whether the terminal can properly access the network, or contact with the administrator. 
SAU_MsgSecurityServerDumbN=No response is received from the server, and your computer can access only the resources in the quarantine area. Please check whether the terminal can properly access the network, or contact with the administrator. 
SAU_MsgSecurityServerDumbY=No response is received from the server, and you failed to pass the security check. Please check whether the terminal can properly access the network, or contact with the administrator. 
SAU_MsgNoSecCheckRequest=No request for security check.
SAU_MsgPassSecauthHint=Security check is passed successfully.
SAU_MsgPassSecauthWithHD=security check is passed but the security vulnerability exists.
SAU_MsgPassOnlineResecauthHint=Online check is passed.
SAU_MsgPassOnlineResecauthWithHD=Online check is passed but the security vulnerability exists.
SAU_MsgAbortOnlineResecauth=The antivirus task for last check is still ongoing, so abort this online check.
SAU_MsgInvalidChecklist=Invalid check parameters:
SAU_MsgAlreadyEndSecauth=Security check session ended.
SAU_MsgUserPCIsolated=Your computer has been isolated to the quarantine region.
SAU_IssInvalidIP=Cannot communicate with EAD server, local IP address is invalid.
SAU_IssWsaStartFail=Cannot communicate with EAD server, socket initialization failed.
SAU_IssSocketFail=Cannot communicate with EAD server, socket creation failed.
SAU_IssSckbindExcept=Cannot communicate with EAD server, socket binding exception.
SAU_IssSckbindTimeout=Cannot communicate with EAD server, socket binding timed out.
SAU_IssSckbindFail=Cannot communicate with EAD server, socket binding failed.
SAU_FileType53=File Type
SAU_MemoryType54=Memory Type
SAU_BootSecType55=Boot Sector Type
SAU_MailType56=Mail Type
SAU_MacroType=Macro Type
SAU_UnknownType57=Unknown Type
SAU_OpenTemplateFileErr72=Failed to open the template file and generate a summary file of operation after authentication.
SAU_FailMsgHead=Security vulnerability detected,information from administrator: 
SAU_AVFailMsgHead=Security vulnerability detected in antivirus check,information from administrator: 
SAU_PatchFailMsgHead=Security vulnerability detected in patch check,information from administrator: 
SAU_SoftFailMsgHead=Security vulnerability detected in software control check,information from administrator: 
SAU_RegCheckFailMsgHead=Security vulnerability detected in register check,information from administrator: 
SAU_WeakPwdCheckFailMsgHead=Security vulnerability detected in Winlogon Password check,information from administrator: 
SAU_SyncUserErr=Security authentication failed, and the current connection will be disconnected. Please contact with the administrator. 
SAU_SyncHostNameErr=The host name is error. Current connection will be cut off.
SAU_SyncDomainBindErr=Error occured for your computer does not bind to domain required. Current connection will be cut off.
SAU_SyncDomainLogonErr=Error occured for your computer does not logon domain required. Current connection will be cut off.
SAU_CountOfflineHint=you are allowed to access network only for
SAU_OfflineTimeEnd=Error occured for your computer does not logon at the right time. Current connection will be cut off.
SAU_OfflineEADError=Current connection will be cut off due to EAD component not authorized while the service required. Please contact with the net manager.
SAU_MsgProxyIPInvalid=Online request can not get through due to invalid acquired proxy server IP address
SAU_MsgProxyPortInvalid=Online request can not get through due to invalid acquired proxy server port number
SAU_PamInvalidDll=Invalid patch DLL
SAU_PamLackMem=Initializing patch DLL failed
SAU_MsgNonAVPluginNotReady=non-antivirus plugin is not ready.
SAU_MsgAVPluginNotReady=antivirus plugin is not ready.
SAU_MsgServerDumb=there is no response from EAD server.
SAU_MsgAVClientNonSupportQuery=antivirus client does not support query:
SAU_MsgAVClientNotWork=antivirus client exception
SAU_MsgMemNewFail=Dynamic memory allocation failed
SAU_MsgThreadCreateFail=Failed to create thread
SAU_MsgMutexCreateFail=Failed to create MUTEX
SAU_NoAllowedAVHead=Lack of antivirus software required by EAD strategy on your computer. You need to install one of them: 
SAU_ErrNoEnvVariable=Environment variables are missing
SAU_ErrNoMainCfgFile=There is no main configuration file. Please reinstall the client.
SAU_ErrMissingItem=There is no configuration items in the main configuration file. Please reinstall the client.
SAU_ErrInvalidItem=The value of configuration item is invalid. Please reinstall the client.
SAU_ErrNoPlugin=There is no plugin settings in the main configuration file. Please reinstall the client.
SAU_ErrMemNewFail=Dynamic memory allocation failed.
SAU_ErrLackPlugin=There is no plugin type in the main configuration file. Please reinstall the client.
SAU_ErrLackAVPlugin=Lack of antivirus. Please reinstall the client.
SAU_ErrAVPluginNotInstall=Lack of antivirus plugin
SAU_ErrPluginNotInstall=Lack of non-antivirus plugin
SAU_ErrConflictiveType=The plug type in the plugin configuration file is incorrect
SAU_ErrNoDllName=There is no dll file name in the plugin configuration file.
SAU_ErrNoProductName=There is no product name in the plugin configuration file.
SAU_ErrNoVersionInfo=There is no plugin version in the plugin configuration file.
SAU_ErrDllInvalid=The specified dll file in the plugin configuration file is invalid.
SAU_ErrDllVersionInfo=The dll file version in the plugin configuration file is invalid.
SAU_ErrConflictiveVersion=The dll file version does not match the one in the plugin configuration file.
SAU_ErrConflictiveName=The product information of dll file does not matche the one in the plugin configuration file.
SAU_ErrPluginMountFail=The installation directory does not exist, or there is no plugin configuration file under the installation directory.
SAU_ErrNewPluginVersionFail=The version of the new plugin to be loaded under the installation directory is the same with or lower than that of the old plugin.
SAU_ErrInvalidPath=Directory does not exist.
SAU_ErrDelFileFail=Failed to delete file
SAU_ErrLoadDllFail=Failed to load DLL library
SAU_ErrInvalidDll=DLL library does not provide interface functions
SAU_ErrPluginInitFail=Failed to initialize DLL library
SAU_ErrPluginNotWork=DLL library does not work properly
SAU_VirusKill=Kill virus
SAU_ReferVirusTaskWait=Virus-scan task is submitted successfully, please wait...
SAU_VirusTaskOverNoWarnings=Virus-scan task is completed. No alarm information is found.
SAU_VirusTaskFailHead=The antivirus task failed (
SAU_RightBracket=) 
SAU_Comma=,
SAU_AVSeparator=, 
SAU_VirusTaskOverReportResults=Virus-scan task is completed and the result will be reported
SAU_VirusTaskOverNoResults=Virus-scan task is completed but getting result failed:
SAU_VirusTaskReferFail=Failed to submit the virus-scan task (
SAU_InstallAVSoft=Antivirus software currently in use on your computer: 
SAU_Check=Currently 
SAU_AbnormalToretryWait= is not running. Please wait while trying to start it...
SAU_AbnormalNotsafeBesureSoftOk= is not running. Cannot pass the security check. Please ensure that the software runs normally.
SAU_AbnormalBesureSoftOk= is not running. Please ensure that the software runs normally.
SAU_NormalVersion= is running (
SAU_AbnormalVersion= is not running (
SAU_NormalVersionVirus=virus definition version: 
SAU_ScanEngVersion=scan engine version: 
SAU_ProgramVersion=program version: 
SAU_NoAvSoftNotSafeInstallForsafe=No required antivirus software is installed in your computer. Security check is not passed. Please install the software quickly to ensure that your computer and network are secure.
SAU_NoAVSoftNptSafeWarning=No required antivirus software is installed in the computer. Security check is not passed. Please install the software to ensure that your computer and network are secure.
SAU_NoAVSoftNptSafeWarningTail=. Please install the software to ensure that your computer and network are secure.
SAU_InnerProgramErrHead=Failed to send the internal message (Error code is:
SAU_LackPatchServer=There is no patch server and thus the patch cannot be checked
SAU_AVQueryFailHead=QUERY (
SAU_AVQueryFailTail=) failed: 
SAU_ForChangePasswordHead=The request of changing user password
SAU_InARow=In a row 
SAU_HeartBeatsNotRespond= heartbeat packets got no response and reauthentication will start.
SAU_MsgAVAutoUpdateOverButNGHead1=Virus definition version after automatical update (
SAU_MsgAVAutoUpdateOverButNGHead2=The antivirus engine version after automatical update (
SAU_MsgAVAutoUpdateOverButNGMid=) and antivirus engine version (
SAU_MsgAVAutoUpdateOverButNGTail=) does not meet security requirements yet. Please contact the system administrator.
SAU_MsgRISING=Rising AntiVirus
SAU_MsgKingsoft=Kingsoft AntiVirus
SAU_MsgJIANGMIN=Jiangmin AntiVirus
SAU_MsgCurAVSoft=Current antiVirus software
SAU_MsgSecauthResultTitle=Security check result for your computer: 
SAU_MsgDetailTailTitle= For details, please click the [Latest security check result] button on the toolbar to show the latest security check result page.
SAU_MsgCurVirusDefHead=Current version: 
SAU_MsgCurVirusNoHead=no required AntiVirus soft installed
SAU_MsgCurVirusDefHeadNODef=Current has no Version
SAU_MsgCurScanEngHead=Current version: 
SAU_MsgCurVirusEngHeadNODef=Current has no Version
SAU_MsgEntryVersionTail=, Lowest version required: 
SAU_MsgOSPatchNG=Patch check is not qualified and the following patches are lacked: 
SAU_MsgNoDescInfo=[No Description]
SAU_MsgSecauthFailForDetail=Security check is not passed.
SAU_MsgOfflineInfoTail=minute(s) current connection will be cut off.
SAU_MsgIsolateInfoTail=minute(s) it will be unable to access network resource beyond the quarantine region.
SAU_MsgIsolateInfoHead=Your computer does not meet security requirements and in 
SAU_MsgOfflineInfo=Your computer does not meet security requirements and current connection will be cut off right away.
SAU_MsgIsolateInfo=Your computer does not meet security requirements and it will be unable to access network resource beyond the quarantine region.
SAU_MsgCHGPasswdNG=Failed to change password.
SAU_MsgCHGPasswdOK=Password changed successfully.
SAU_MsgOfflineFromServer=EAD server requires the user to log off.
SAU_MsgHintFromServer=EAD server hint the user:  
SAU_MsgReauth1=EAD server detects that the current session is off, a new one will be started soon.
SAU_MsgStartSecauthHint=Start security check session...
SAU_MsgInvalidXMLDoc=The pending format of XML documents does not meet the requirements.
SAU_MsgXMLParserInitFailed=Initializing XML parser failed. Please repair manually.
SAU_MsgXMLParserFailed=XML parser failed for parsing the packet.
SAU_MsgAVDefUpdateCommitFinish=The task of updating virus definition and antivirus engine finished.
SAU_MsgAVDefUpdateFailedHead=The task of updating virus definition and antivirus engine failed: 
SAU_MsgAVDefUpdateCommitOK=The task of updating virus definition and antivirus engine has been submitted successfully, please wait...
SAU_MsgTaskNameAVDefUpdate=Virus definition and antivirus engine update
SAU_MsgMonTaskCommitFailedHead=Failed to submit the task of setting monitor strategy: 
SAU_MsgMonSettingFailedHead=Failed to set the monitor strategy: 
SAU_MsgTaskNameSetMon=Settings of monitor strategy
SAU_MsgFailSettingMonitor=Cannot set the strategy of virus monitor
SAU_MsgAVRunNGTail= Running state: Abnormal
SAU_MsgNETSCANFAIL=Net Stream is abnormal
SAU_MsgWeakPwdFAIL=The password of Logon don't match the complex rule
SAU_MsgRegCheckFAIL=The Register is abnormal
SAU_MsgPwdDicFail=The file has broken, please start on line to repair such error.
SAU_AccStatus=AccChecker status:
SAU_NotInstalled= (#)  not installed
SAU_LowerVer= (#) version is lower than required
SAU_AssetNumNotSet= (#) machine asset number is not filled
SAU_AnotherPamOngoing=Wait current patch check launched by another security check session to complete
SAU_PamDowloadAndInstalling=Wait current patch check tool to download and install
SAU_PamDowloadAndInstallSucc=patch check tool has already installed
SAU_PamDowloadAndInstallFail=patch check tool fail to install

######### service center module (SRV) #########
SRV_TimeFmt=%d year %02d month %02d day %02d hour(s) %02d minute(s) %02d second(s)
SRV_PtIniFailed=Initialization failed for this protocol, so the requested operation cannot be executed.
SRV_PtIniFailedForVPN=Initialization failed for this protocol, please ensure the virtual nic is enabled and restart the client.
SRV_PtIniFailedForPortErr=Initialization failed for this protocol, because the port(50200) is used by another process.
#SRV_DomainInfoInval There is no proper information in Logon-once connection. Cannot start an authentication.
SRV_NotAdminCannotUpdate=You do not have administrative privileges on this computer, online update cannot run.

SRV_ClientBeingExit=Waiting for the program to exit...

SRV_CompChkFoul=Component check foul
SRV_ProtoCompTrialOut=Current connection will be cut off due to component trial period expiration.
SRV_EadCompTrialOut=Security check session will not be started (or will be cut off if started before) due to component trial period expiration.

SRV_ProtoCompUserSumFoul=Current connection will be cut off due to limitation on number of users to correlative component.
SRV_EadCompUserSumFoul=Security check session will not be started (or will be cut off if started before) due to limitation on number of users to correlative component.

SRV_IllegalClient=Current iNode client is not authorized. Please use an authorized one.
SRV_ProtoStampError=Current connection will be cut off due to unreachable iNode management center.
SRV_EadStampError=Security check session will not be started (or will be cut off if started before) due to unreachable iNode management center.
SRV_LicNotEffective=Current iNode license has been invalidated.
SRV_CompoNotAuthorized=Current connection will be cut off due to component not authorized.


#########  control center module (CTL) #########




#########  GINA module (GNA) #########
GNA_BeginDomAuthWait=Network access auth is ongoing. Please wait...
GNA_DomAuthFail=Logon-once authentication failed.
GNA_ErrHint=Error hint

#########  wireless auth module (WAU) #########
WAU_StartAssocOpen=Connecting to open network
WAU_StartAssocSecure=Connecting to security network
WAU_AssocOpen=Connected to open network
WAU_StartKeyNegotiate=Start negotiating network encryption key
WAU_AssocKeyFailed=Failed to connect to current security network
WAU_AssocKeyOK=Connected to current security network

WAU_NoSsid=Failed to connect to wireless network ---- invalid SSID
WAU_Wpa2NotSupported=Failed to connect to wireless network with WPA2 ---- current wireless network interface card does not support WPA2.
WAU_ConnTimeout=Failed to connect to wireless network, please make sure security mode and encryption type are set correctly.

WAU_ConnCutOff=Wireless network is disconnected
WAU_DisassocUserReq=On user request
WAU_DisassocInvalidIe=Key handshake failed
WAU_8021X_FAIL=User identification authentication (802.1X) failed
WAU_KeyShakeFail=Time out for key handshake
WAU_8021X_Timeout=Time out for user identification authentication (802.1X)
WAU_DisassocCipherChg=Cipher suite is changed for current network. Please re-connect.
WAU_DisassocUnknown=Unknown reason

WAU_NetIsConnected=Connected to network
WAU_NetMightNotAvailable=Current connection was caused by the NIC or other client. If the network is still unavailable, please cut off the connection and start it again using current client.

WAU_NoWirelessDev=No wireless network adapter was found.

#########  wireless module (CTL) #########
WLAN_ConnOpGroupName=Wireless Connection Operations
WLAN_Conn2WirelessCmd=Connect to Wireless Network
WLAN_CreateWirelessConnCmd=Setup Wireless Network Connection
WLAN_Conn2WirelessMenuCmd=Connect to Wireless Network(&B)
WLAN_CreateWirelessConnMenuCmd=Setup Wireless Network Connection(&D)
WLAN_NotFindWirelessAdapter=Can not detect the wireless adapter.
WLAN_RefreshWireless=Refresh Wireless Network(&F)
WLAN_RefreshWirelessCmd=Refresh Wireless Network
WLAN_SecTypeColumn=Security Type
WLAN_SignalColumn=Signal
WLAN_ConnectedSta=Connected
WLAN_DisconnectedSta=Disconnected
WLAN_StatusStatic=Status

WLAN_SignalNo=No Signal
WLAN_SignalExcellent=Excellent
WLAN_SignalVeryGood=Very Good
WLAN_SignalGood=Good
WLAN_SignalLow=Low
WLAN_SignalVeryLow=Very Low

WLAN_NetworkTypeStatic=Network:
WLAN_AuthTypeStatic=Authentication(&E):
WLAN_EncTypeStatic=Encryption Type(&H):
WLAN_SecKeyStatic=Security Key(&K):
WLAN_KeyIndexStatic=Key Index(&I):

WLAN_KeyorPwd=Please input the security key or password:
WLAN_WPAX1PgBtn=802.1X Properties(&X)
WLAN_WPAX1PgTitle=802.1X Properties
WLAN_WPAX1NetworkSetting=Network Settings
WLAN_WPAX1UserSetting=Account Settings

WLAN_NetworkKeyStatic=Network Key(&K):
WLAN_CfmNetworkKeyStatic=Confirm Network Key(&C):
WLAN_LogHintStatic=Network requires you to input the key.

WLAN_CreateWirelessWzdTitle=Setup wireless network connection wizard
WLAN_CreateWirelessWzd=Setup a wireless network connection
WLAN_CreateWirelessWzdTips=Input the information of wireless network connection you want to add.
WLAN_CreateWirelessWzd2Tips=Input the 802.1X information of wireless network connection you want to add.
WLAN_CreateWirelessSucc=Set up a wireless network connection successfully.
WLAN_SaveWireless=Save the wireless network(&S)

WLAN_StatusPgTitle=Wireless Adapter Status
WLAN_AssoComboxStatic=Association Infomation
WLAN_EncComboxStatic=Encryption Information
WLAN_NETComboxStatic=Network Information

WLAN_AuthTypeStaticNoHotKey=Authentication Type:
WLAN_EncTypeStaticNoHotKey=Encryption Type:

WLAN_NetworkTypeStatic=Network:
WLAN_SupportedRatesStatic=Supported Rates:

WLAN_CreateBtn=Create
WLAN_ConnWirelessAutoChk=Connect to this wireless network automatically(&T)
WLAN_InvalidKey=Invalid key, please try again.
WLAN_SaveKeyChk=Save the key or password(&F)

WLAN_InputSsidPls=Please input SSID.
WLAN_InputKeyPwdPls=Please input the network key or password.
WLAN_InputNetKeyPls=Please input the network key.
WLAN_InputCfmNetKeyPls=Please input the confirm network key.

WLAN_MenuSaveWl=Save Wireless Network(&S)

WLAN_MenuWlStatus=Wireless Adapter Status(&S)
WLAN_ViewWLAdapterStatusConnCmd=View Wireless Adapter Status
WLAN_CannotRefreshWireless=No wireless network available.
WLAN_PwdNotMatch=The password and the confirm password do not match. Please try again.
WLAN_EncStatus=Encryption Status:
WLAN_SelEncType=Please select the encryption type.

WLAN_EncNo=No
WLAN_EncNotSupp=Encryption Not Supported
WLAN_KeyNegotiating=Negotiating Key
WLAN_KeyTooShort=The shortest length of the key is 8. 
WLAN_KeyTooLong=The length of the key can not be larger than 63.
WLAN_ConnectedAndSecSta=Connected and passed security check.
WLAN_ConnectedNotSecSta=Connected but not passed security check.

WLAN_NoWireProtoCus=The client is not authorized to use wired component.
WLAN_HasAssociated=The other wireless network has been associated already.\n Please disconnect the current association.
WLAN_WlanMngInfo=You select Windows to manage wireless,so you can't use iNode to associate wireless.\n Please check [Operation/Use Windows to manage wireless] and make sure this item is unchecked. 

######### DAMA  UI module (DUI)  ֵԴ#########
DUI_DosGetOnline=Connected to the DAM server
DUI_DosGetOffline=Disconnected to the DAM server
DUI_ArsGetDone=Asset registration done
DUI_ArsGetUndone=Asset registration pending

DUI_DlgTitile_ConfirmAssetInfo=Confirm Asset Info
DUI_ConfirmAssetInfo_Hint=If the following info does not match with current computer, please click 'Cancel' to input a new asset number. 
DUI_ConfirmAssetInfo_Hint2=If the following info does not match with current computer, please contact your system manager.
DUI_DlgTitile_InputAssetInfo=Input Asset Info
DUI_InputAssetInfo_Hint=Please fill in the following info sheet for current computer correctly:

DUI_DlgtTitle_SoftToInstall=Software Distribution Management
DUI_SoftwareName=Software Name
DUI_SoftwareVersion=Version
DUI_InstallStatus=Install Status
DUI_Wait2Install=Wait to install
DUI_Installed=Installed
DUI_InstallUnknown=Unknown
DUI_InstallFail=Failed or time out
DUI_InstallStartFail=Failed to start install program
DUI_Installing=Installing, not finished
DUI_SoftwareList=Software List
DUI_InstallMode=Install Mode
DUI_InstallMode_Green=Green
DUI_InstallMode_Slience=Slience
DUI_InstallMode_Interactive=Interactive
DUI_DownloadStatus=Download Status
DUI_DownloadStatus_Success=Success
DUI_DownloadStatus_FAIL=Wait to try next time
DUI_DownloadStatus_Unfinished=Unfinished
DUI_ShowInstSoft=Show Installed Software(s)
DUI_InstallHint=Hint: Double click on certain software name in list to start to install it. If you end the installation by mistake or purpose, it might take a few minutes for DAM Agent to detect that. Please be patient for a while.

DUI_StatusInfo=Status Information
DUI_ConnStatus=Connection Status: 
DUI_RegStatus=Asset Register Status: 
DUI_DamOnline=Online
DUI_DamOffline=Offline
DUI_Registered=Registered
DUI_Unregistered=Unregistered

DUI_Input_AssetNo=Input Asset Number
DUI_AssetNo=AssetNo:
DUI_AssetOwner=Asset Owner:
DUI_AssetGroup=Asset Group:
DUI_AssetConfig=Model:
DUI_AssetPosition=Position:
DUI_AssetVendor=Vendor:
DUI_AssetType=Type:
DUI_AssetDescrip=Description:
DUI_AssetType_PC=PC
DUI_AssetType_LAPTOP=Laptop
DUI_AssetType_WORKSTATION=WorkStation
DUI_AssetType_SERVER=Server
DUI_AssetType_OTHER=Other

DUI_InvalidAsset_TryAgain=Invalid asset number. Please try again.
DUI_AssetTaken_TryAgain=The asset number is taken. Please input your asset number correctly.
DUI_PlsInputAssetId=Please input asset number for current computer correctly.

DUI_AssetInfo_FillHint=The items labeled with asterisk(*) cannot be left empty.

######## DAMA  UI module (DUI)  iNodeںϰ汾ĶԴ###########
DUI_DlgtTitle_Status=DAM Agent Status
DUI_DamRunStatus=Runing Status: 
DUI_DamRuning=Running
DUI_DamStopped=Stopped


 
##### Linux/Mac iNode resource , by g02084, 2009-6-1 ############
MAC_LINUX_NAME=iNode Intelligent Client
MAC_LINUX_VERSION=Version
MAC_LINUX_VERSION_DETAIL=3.60-E6208
MAC_LINUX_PRODUCTOR=Hangzhou H3C Technologies Co., Ltd.
MAC_LINUX_USEDTIME=Duration

##### Menu and tool bar #####
MAC_LINUX_FILE=&File
MAC_LINUX_NEW_CONNECTION=&New Connection
MAC_LINUX_NEW_CONNECTION_DES=New Connection
MAC_LINUX_DELETE=&Delete
MAC_LINUX_DELETE_DES=Delete
MAC_LINUX_PROPERTY=&Property
MAC_LINUX_PROPERTY_DES=Property
MAC_LINUX_CONNECT=&Connect
MAC_LINUX_CONNECT_DES=Connect
MAC_LINUX_DIS_CONNECT=D&isconnect
MAC_LINUX_DIS_CONNECT_DES=Disconnect
MAC_LINUX_EXIT=&Exit
MAC_LINUX_EXIT_DES=Exit
MAC_LINUX_OPERATION=&Operation
MAC_LINUX_OPERATION_DES=Operation
MAC_LINUX_CLIENTS_SETTING=Client &Settings
MAC_LINUX_CLIENTS_SETTING_DES=Client Settings
MAC_LINUX_HELP=&Help
MAC_LINUX_HELP_DES=Help
MAC_LINUX_ABOUT=About
MAC_LINUX_ABOUT_DES=About
MAC_LINUX_SECTRAP=&Trigger security check
MAC_LINUX_SECTRAP_DES=Trigger security check

##### Button resource #########################################
MAC_LINUX_BUTTON_OK=OK
MAC_LINUX_BUTTON_CANCEL=Cancel

####### Property Dialog #########################################
MAC_LINUX_DIALOG_TITLE_CREATE_NEW=Create New Connection
MAC_LINUX_DIALOG_TITLE_PROPERTY=Property
MAC_LINUX_CONNECTION_NAME=Connection name
MAC_LINUX_USERNAME=User name
MAC_LINUX_PASSWORD=Password
MAC_LINUX_SAVE_PASSWORD=Save password
MAC_LINUX_SELECT_NIC=Select NIC
MAC_LINUX_PACKET_TYPE=Packet Type
MAC_LINUX_PACKET_TYPE_UNICAST=Unicast
MAC_LINUX_PACKET_TYPE_MUTICAST=Multicast
MAC_LINUX_USER_OPTIONS=User Options
MAC_LINUX_CARRY_VERSION=Carry version info
MAC_LINUX_UPLOAD_IP=Upload IP address
MAC_LINUX_BROADCAST_LOGOFF=Broadcast logoff
MAC_LINUX_COMMON=:
MAC_LINUX_REFRESH_IP=Auto-renew IP address after disconnected(&Z)
MAC_LINUX_HOLD_ID=Hold IP address after disconnected(&H)

MAC_LINUX_LOGLEVEL=Log Level
MAC_LINUX_LOGLEVEL_FATAL=FATAL
MAC_LINUX_LOGLEVEL_ERROR=ERROR
MAC_LINUX_LOGLEVEL_WARNING=WARNING
MAC_LINUX_LOGLEVEL_INFO=INFO
MAC_LINUX_LOGLEVEL_DEBUG=DEBUG
MAC_LINUX_LOGLEVEL_DETAIL=DETAIL

MAC_LINUX_ABOUT=About

#### Operation resources #####
MAC_LINUX_ERROR_TITLE=Error Message
MAC_LINUX_NIC_INFO_ERROR=NIC information error, please restart iNode Client or contact network administrator.
MAC_LINUX_CONN_DELETE_DETERMINE=Are you sure to delete the connection?
MAC_LINUX_ComfirmExitClient=Confirm Client Exit
MAC_LINUX_BeSureToExit=Are you sure to exit iNode Intelligent Client?

### Error Massege #####################
MAC_LINUX_ERROR_MSG_1=Please input connection name.
MAC_LINUX_ERROR_MSG_2=Please input user name.
MAC_LINUX_ERROR_MSG_3=Please input the password.
MAC_LINUX_ERROR_MSG_4=Please select one connection.
MAC_LINUX_ERROR_MSG_5=Something is wrong with the connection, please reselect one.
MAC_LINUX_ERROR_MSG_6=Connection information is wrong, please reselect one.
MAC_LINUX_ERROR_MSG_7=Please select one NIC.


####### Authentication MSG #############
MAC_LINUX_AUTHEN_CONNECT=Connecting to the network...
MAC_LINUX_AUTHEN_BEGIN=Beginning authentication... 
MAC_LINUX_AUTHEN_PASSWORD=Authenticating password...
MAC_LINUX_AUTHEN_PASSED=You have passed the identity authentication
MAC_LINUX_AUTHEN_START_SEC=Start security check session...
MAC_LINUX_AUTHEN_SEC_RESULT=Security check result for your computer: 
MAC_LINUX_AUTHEN_SEC_RESULT_PASS=Security check is passed successfully.
MAC_LINUX_AUTHEN_SEC_RESULT_FAILED=Security check failed, please contact administrator for details.
MAC_LINUX_AUTHEN_SEC_NO_REQUEST=No request for security check.
MAC_LINUX_AUTHEN_SEC_CHECK_FAILED=Does not meet security requirements and current connection will be cut off.
MAC_LINUX_HANDSHAKE_TIMEOUT=Network timed out for the user is off line.
MAC_LINUX_USER_LOG_OUT=User logged out.
MAC_LINUX_USER_STATE_EXCEPTION=User's state exceptional.

MAC_LINUX_AUTHEN_SEC_FAIL_NOAV=no required AntiVirus soft installed.
MAC_LINUX_AUTHEN_SEC_FAIL_AVRUNERR=Current AntiVirus soft is not running. 
MAC_LINUX_AUTHEN_SEC_FAIL_AVVIRDEF=Current virus definition version is lower than the lowest version required.
MAC_LINUX_AUTHEN_SEC_FAIL_AVENGDEF=Current virus scan engine version is lower than the lowest version required.

MAC_LINUX_AUTHEN_CONNECT_CLOSED=Disconnecting to the network...
MAC_LINUX_CONNECT_CLOSED=Connection closed.

MAC_LINUX_AUTHEN_CONNECT_FAILED=Connection failed.
MAC_LINUX_AUTHEN_CONNECT_EXCEPTIONAL=Connection's state exceptional.
MAC_LINUX_AUTHEN_DISCONNECT_FAILED=Disconnection failed.

MAC_LINUX_AUTHEN_MSG_ERROR_1=A client is connecting or disconnecting network, please wait a moment...
MAC_LINUX_AUTHEN_MSG_ERROR_2=The connection's state is not permitted to be disconnected.
MAC_LINUX_AUTHEN_MSG_ERROR_3=The connection's state is not permitted to be connected.
MAC_LINUX_AUTHEN_MSG_ERROR_4=A client can not be deleted with its or others connecting, disconnecting, connected or other spacial states.
